Liquid Controls MS-Series
Materials of Construction
Meter housing: Steel or stainless steel (epoxy coated steel available for aviation and other applications)
Meter element and rotors: Cast aluminum (other metallurgies available including cast iron and stainless steel)
Internal components: Aluminum, Ni-Resist, stainless steel, iron
Seal materials Buna-N, Viton, PTFE
Bearings Carbon, PTFE, Ni-Resist
Liquid Controls MS-Series meters meet NTEP (NIST Handbook 44) and International Weights and Measures accuracy requirements as well as U.S. Military specifications.
|Liquid Controls||Specifications Accuracy / Performance: Electronic Registration Linearity: Capable of ±0.10% over a 5:1 range Capable of ±0.10% over a 10:1 range Capable of ±0.15% over a 40:1 range Mechanical Registration Linearity: Capable of ±0.125% over a 5:1 range Capable of ±0.22% over a 10:1 range Capable of ±0.5% over a 40:1 range Repeatability: Capable of 0.02% or better at any flow rate over entire range Sizes: 1 1/2" through 6" Flow Rates: 5 GPM through 1,000 GPM End Connections: ANSI Flanged, NPT, BSPT, Slip Weld Pressure Ratings M-Series and MA-Series Cast Case: 150 & 350 PSI non shock working pressure MS-Series Two Case Steel Case: 150/150, 150/275, 300/300, 300/720 PSI; 600/1440 ANSI non- shock working pressure|
© 2016 All Rights Reserved. Twin Crown Oil Field Equipment.