PARTICULATE REMOVING
SPECIFICATIONS
? PetroClear model 51110P utilizes a 10 micron cellulose media to remove particulate from gasoline and diesel fuels including
all Ethanol blended gasoline, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils and synthetic fluids. Removes
a minimum of 75% of particulate 10 micron size (and approximately 100% of larger sized particulate).
? PetroClear model 51130P utilizes a 30 micron cellulose media to remove particulate from gasoline and diesel fuels including
all Ethanol blended gasoline, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils and synthetic fluids. Removes
a minimum of 75% of particulate 30 micron size (and approximately 100% of larger sized particulate).
? The maximum flow rate for PetroClear models 51110P and 51130P is 40 gpm (151 lpm). Maximum operating pressure is 50 psid
(3.4 bar). Maximum differential pressure is 25 psid (1.7 bar).
? PetroClear models 51110P and 51130P utilize a standard 1-1/2"-16 UNF mounting thread ref. (1" flow) required for most spin-on
filter adaptors used in aftermarket and/or high-flow applications.
? Adaptors are available for models 51110P and 51130P in aluminum. These adaptors are available in both NPT or BSP inlet/
outlet threads. Inlet/outlet sizes are available in 1" and 1-1/2" single adaptors. Adaptors are also available in a dual style with
both 1-1/2" and 2" inlet/outlet (2"– 4" bolt SAE flange combination).
? Each filter is packaged with a separate gasket that will fit most standard brands of adaptor filter mounting bases.
Install gasket in adaptor’s groove by placing in groove at 3 to 4 places and then smoothing gasket between those points.
Lubricate with light oil. NOTE: Gasket does not mount on filter!
? If using this filter in a hydraulic/lube oil application, verify that you are applying the filter on a spin-on filter head that has
a by-pass valve.
| Petro clear | SPECIFICATIONS ? PetroClear model 51110P utilizes a 10 micron cellulose media to remove particulate from gasoline and diesel fuels including all Ethanol blended gasoline, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils and synthetic fluids. Removes a minimum of 75% of particulate 10 micron size (and approximately 100% of larger sized particulate). ? PetroClear model 51130P utilizes a 30 micron cellulose media to remove particulate from gasoline and diesel fuels including all Ethanol blended gasoline, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils and synthetic fluids. Removes a minimum of 75% of particulate 30 micron size (and approximately 100% of larger sized particulate). ? The maximum flow rate for PetroClear models 51110P and 51130P is 40 gpm (151 lpm). Maximum operating pressure is 50 psid (3.4 bar). Maximum differential pressure is 25 psid (1.7 bar). ? PetroClear models 51110P and 51130P utilize a standard 1-1/2"-16 UNF mounting thread ref. (1" flow) required for most spin-on filter adaptors used in aftermarket and/or high-flow applications. ? Adaptors are available for models 51110P and 51130P in aluminum. These adaptors are available in both NPT or BSP inlet/ outlet threads. Inlet/outlet sizes are available in 1" and 1-1/2" single adaptors. Adaptors are also available in a dual style with both 1-1/2" and 2" inlet/outlet (2"– 4" bolt SAE flange combination). ? Each filter is packaged with a separate gasket that will fit most standard brands of adaptor filter mounting bases. Install gasket in adaptor’s groove by placing in groove at 3 to 4 places and then smoothing gasket between those points. Lubricate with light oil. NOTE: Gasket does not mount on filter! ? If using this filter in a hydraulic/lube oil application, verify that you are applying the filter on a spin-on filter head that has a by-pass valve. |
© 2016 All Rights Reserved. Twin Crown Oil Field Equipment.
